曲臂式升降平臺http://www.m.cz114.cn/具有操作簡單、使用方便、作業半徑大等特點，特別是能夠懸伸作業，跨越一定的障礙物或在一處升降，并可進行大范圍多點作業，極大的提高了工作效率。下面金臂人升降機械的專家給大家詳細分析一下液壓泵站的運行禁忌有哪些？

1、在安裝運行曲臂式升降平臺之前，必須將油箱，管道，液壓缸和閥門等清洗干凈，灌入油箱的新油必須用濾油機過濾，防止油桶不清潔引起的油液污染。
The new oil before installation and operation of the crank arm type lifting platform must be the tank and pipeline, hydraulic cylinder and valve cleaning clean, poured into the tank must filter oil filter to prevent oil drums clean caused by oil pollution. 

2、曲臂式升降平臺新泵站在使用一周之后，液油的溫度不得超過82°，應將油全部過濾一次，然后根據升降機工作環境和使用頻率等情況3-6個月更換一次液壓油，清洗一次油箱。
Crank arm type lifting platform of new pumping station after a week, the oil temperature shall not be more than 82 degrees, should be all the oil is filtered once, then according to lift working environment and using frequency 3-6 months to replace a hydraulic oil, cleaning a tank. 

3、曲臂式升降平臺開始液壓回路中使用時需要液壓泵具有一定的自吸能力，發生氣蝕不僅可能使液壓泵損壞，還引起震動和噪聲，使得控制閥執行元件動作不良，從而對曲臂式升降平臺整個液壓系統造成惡劣影響。
Crank arm type lifting platform to hydraulic circuit used to hydraulic pump with a self absorption capacity, cavitation may not only leads to the damage of the hydraulic pump, also caused by vibration and noise, the control valve actuator movement adverse, thus the crank arm type lifting platform for the hydraulic system caused adverse effects.